What to do if Peak Scientific Genius 1022 does not switch on?
If your Peak Scientific Portable Generator won't switch on and the power switch isn't lit, ensure the power cord is properly plugged into the generator and the power socket is on. Also, check the fuse in the power cord plug.
Why is the yellow “HIGH DUTY” LED constantly on in Peak Scientific Genius 1022?
If the yellow “HIGH DUTY” LED on the front panel of your Peak Scientific Portable Generator is constantly on, ensure ambient temperatures are within the specified range. Also, make sure there are no leaks between the generator and the mass spec.
Explains warning and caution symbols used in the manual.
General safety instructions for installation and operation of the generator.
Specifies operating/storage temperatures, altitude, and humidity.
Details gas output, flow rate, purity, connections, voltage, frequency, and current.
Provides unit dimensions, weight, and other general specifications.
Specifies operating/storage temperatures, altitude, and humidity.
Details gas output, flow rate, purity, connections, voltage, frequency, and current.
Provides unit dimensions, weight, and other general specifications.
Specifies operating/storage temperatures, altitude, and humidity.
Details gas output, flow rate, purity, connections, voltage, frequency, and current.
Provides unit dimensions, weight, and other general specifications.
Specifies operating/storage temperatures, altitude, and humidity.
Details gas output, flow rate, purity, connections, voltage, frequency, and current.
Provides unit dimensions, weight, and other general specifications.
Details requirements for a well-ventilated environment and air gaps.
Explains how ambient conditions affect generator performance.
Diagrams showing the overall physical dimensions of the generator.
Details mains voltage, frequency, and wiring (earth, live, neutral).
Explains the use of the inbuilt voltmeter and transformer recommendation.
Recommendations for tubing diameter based on length for optimal performance.
Details two modes (Nitrogen, Chip Cube) for the Genius 1023.
Explains how the generator supplies gas based on application demand.
Outlines recommended purchase intervals and quantities for maintenance kits and assemblies.
Service due soon, indicated by a steady yellow LED.
Service overdue, indicated by a flashing yellow LED.
Procedure for resetting the service indicator after maintenance.
Details installation, response plans, IQ/OQ, spares, and technical support.
Automatic reset of the HIGH DUTY indicator when compressors cycle.
Interpreting HIGH DUTY indication as a potential fault or leak.
Resolving power, pressure building, and low pressure reporting problems.
Interpreting and resolving SERVICE and HIGH DUTY LED indications.
Instructions for registering product for a 12-month on-site warranty.
Details on Peak [Protected] aftercare support packages.
Information on Peak's global network of certified field service engineers.
General| Brand | Peak Scientific |
|---|---|
| Model | Genius 1022 |
| Category | Portable Generator |
| Language | English |
To Next Page
