PeakTech 1565 - Page 33

Input Command:
GOVP[CR]
Return value:
<voltage>[CR]
OK[CR]
Get preset upper limit of
output Voltage
<voltage>=???
Input command:
GOVP[CR]
Return value:
111[CR]
OK[CR]
Meaning:
The preset upper limit of
output Voltage is 11.1V
Input Command:
SOVP<voltage>[CR]
Return value:
OK[CR]
Preset upper limit of output
Voltage
<voltage>=000<???<Max-Volt
*Max-Volt value refer to
product specification
Input command:
SOVP151[CR]
Return value:
OK[CR]
Meaning:
Preset upper limit of output
Voltage as 15.1V
Input Command:
GOCP[CR]
Return value:
<current>[CR]
OK[CR]
Get preset upper limit of
output Current
<current>=???
Input command:
GOCP[CR]
Return value:
111[CR]
OK[CR]
Meaning:
The preset upper limit of
output Current is 11.1A
Input Command:
SOCP<current>[CR]
Return value:
OK[CR]
Preset upper limit of
output Current
<current>=000<???<Max-Curr
*Max-Curr value refer to
product specification
Input command:
SOCP151[CR]
Return value:
OK[CR]
Meaning:
Preset upper limit of output
Current as 15.1A
-32-