7
Rear Panel
1. AC power socket 2. Fan 3. External Modulation Input Terminal 4. Input of frequency
measurement 5. Power Amplifier Input 6. Power Amplifier Output
1.3 Screen description
There are two rows of digisplay on the screen. The parameters of time such as
frequency, period, interval, gate time, frequency deviation modulation, duty cycle
and others are shown on the upper row. The parameters of voltage such as amplitude,
offset, attenuation, as well as other parameters such as harmonic times, phase
difference, waveform sequence number and so on are shown on the lower row. There
are 22 indicator lights on the screen indicating output channels, signal waveforms,
the current function and options as well as the units of the parameters. The
instrument has 5 functions with the following different options. The options with
shadow in the following table are the common ones which can be selected directly
by pressing the corresponding keys on the front panel and the instrument will enter
into the function of these options automatically. The options without shadow are
uncommon-used .So it is required to select the corresponding function firstly, and
then select different terms circularly by 【Menu】.
2 3 5 6
1
To Next Page
Loading...