PeakTech 4055 MV - Default Setting; Continuity Function; Frequency Sweeping Function; Burst

4.15. Default setting
4.15.1. Continuity function:
Continuity function is default after booting.
Waveform
sinewave
Frequency
1 kHz
Amplitude
1 Vpp
Attenuation
auto
Offset
0Vdc
Duty cycle
50%
Output phase
0°
Output port
open
4.15.2. Frequency sweeping function:
Start frequency
100 Hz
End frequency
1 kHz
Sweep time
3 s
Sweep mode
linearity
Trigger mode
internally,
continuous
4.15.3. Burst:
Repeated period
10ms
Burst count
3
Start phase
0°
Trigger mode
internally,
continuous
4.15.4. Modulation (FM, AM, PM, PWM):
Modulation frequency
1 kHz
Modulation frequency deviation
1 kHz
Modulation amplitude depth
100 %
Phase offset
180°
Modulation width depth
50 %
Modulation waveform
Sine
4.15.5. FSK
Hop rate
1 kHz
Hop frequency
4 kHz
Modulation waveform
square
Trigger mode
internally,
continuous
-52-