1. Safety precautions
This product fulfills the requirements of the following directives of the
European Community: 2014/30 / EU (electromagnetic compatibility) to
2014/32 / EU (CE marking).
The following safety precautions must be observed before operation.
Damages resulting from failure to observe these safety precautions
are exempt from any legal claims whatever:
* Comply with the warning labels and other info on the equipment.
* Do not subject the equipment to direct sunlight or extreme
temperatures, humidity or dampness.
* Do not subject the equipment to shocks or strong vibrations.
* Do not operate the equipment near strong magnetic fields (motors,
transformers etc.).
* Keep hot soldering irons or guns away from the equipment.
* Allow the equipment to stabilize at room temperature before taking
up measurement (important for exact measurements).
* Replace the battery as soon as the battery indicator “ ”
appears. With a low battery, the meter might produce false
reading that can lead to electric shock and personal injury.
* Fetch out the battery when the meter will not be used for long
period.
* Periodically wipe the cabinet with a damp cloth and mid detergent.
Do not use abrasives or solvents.
* Do not operate the meter before the cabinet has been closed and
screwed safely as terminal can carry voltage.
* Do not store the meter in a place of explosive, inflammable
substances.
* Do not modify the meter in any way.
* Opening the equipment and service- and repair work must only be
performed by qualified service personnel.
* Measuring instruments don’t belong to children hands.
-10-
To Next Page
Loading...
Need help?
General
