Need help?Do you have a question about the PeakTech 1636 and is the answer not in the manual?
General| Category | Digital Multimeter |
|---|---|
| DC Current | 200 µA / 2 mA / 20 mA / 200 mA / 10 A |
| Diode | Yes |
| Battery Test | 1.5V / 9V |
| DC Voltage | 200mV/2V/20V/200V |
| DC Voltage Accuracy | ± 0.5% + 2 dgt. |
| AC Voltage | 200V |
| AC Voltage Accuracy | ± 1.2% + 10 dgt. |
| DC Current Accuracy | ±(1.0% + 2 digits) |
| Resistance | 200 Ω / 2 kΩ / 20 kΩ / 200 kΩ / 2 MΩ |
| Resistance Accuracy | ± 0.8% + 2 dgt. |
| Continuity | Yes |
Defines CAT I, II, III, and IV for safe operation and measurement.
Lists essential precautions like avoiding extreme conditions, magnetic fields, and proper handling.
Identifies key components like the clamp, lever, switches, and display.
Explains how to perform AC current measurements using the clamp meter.
Describes how to use the Hold function to freeze readings.
Explains how to activate and deactivate the display backlight.
Details how to use the Max function to display the maximum measured value.
Explains the automatic power-off feature to save battery life.
To Next Page
