Need help?Do you have a question about the PeakTech 3430 and is the answer not in the manual?
General| Category | Digital Multimeter |
|---|---|
| DC Voltage Accuracy | ±(0.5% + 2 digits) |
| AC Voltage Accuracy | ±(1.0% + 3 digits) |
| DC Current Accuracy | ±(1.0% + 2 digits) |
| Resistance Accuracy | ±(0.8% + 2 digits) |
| Diode | Yes |
| Continuity | Yes |
| Battery Test | 1.5 V / 9 V |
| Frequency Range | 10 Hz - 10 MHz |
| DC Current | 10 A |
| Measuring Category | CAT III 600V |
| Capacitance Range | 40nF/400nF/4µF/40µF |
| AC Current | 400µA/4000µA/40mA/400mA/10A |
Defines the maximum voltage and current limits for each measurement function.
Explains specific terms like Pmax, Pmin, UL, and OL related to measurements.
Illustrates and explains the meaning of important safety symbols found on the device.
Provides instructions on using appropriate test leads and handling high voltage measurements safely.
Lists general specifications including display, operating temperature, dimensions, and weight.
Details the measurement ranges, resolution, and accuracy for various electrical parameters.
Explains how to connect test leads for measurements and highlights associated warnings.
Details the functions of buttons like LCD, REL, RANGE, MAX/MIN, HOLD, FUNC, VAHz/%, PEAK and the rotary switch.
Identifies the V/Ω/Hz/-, COM, 10A, and µA/mA input terminals on the device.
Step-by-step guide for measuring DC voltage, including warnings and important notes.
Step-by-step guide for measuring AC voltage, including warnings and important notes.
Instructions for measuring DC and AC current, with safety warnings and precautions.
Detailed steps for measuring resistance, including safety warnings and accuracy tips.
Procedure for measuring capacitance, with warnings about charged capacitors and discharge.
Steps for measuring inductance, with warnings about connecting voltage to the device.
Guide on how to measure signal frequency, including safety warnings for AC outlets.
Procedure for checking diodes and semiconductors, including forward voltage measurements.
Steps for performing audible continuity tests and verifying circuit connections.
Instructions for connecting the multimeter to a PC using a USB cable.
Guides through installing the necessary driver and application software for PC connectivity.
Step-by-step guide for replacing the meter's batteries, including safety warnings.
Instructions for safely replacing the internal fuse of the multimeter, with warnings.
To Next Page
