Need help?Do you have a question about the PeakTech 5201 and is the answer not in the manual?
General| Display | LCD with automatic backlight |
|---|---|
| Resolution: | 0.1 |
| Measurement Range | 0.0 ~ 100.0 |
| Penetration depth | 20 ~ 40 mm |
| DATA-HOLD | Holds measurement value in display |
| Low Battery Indication | Symbol “ “ shown in the display |
| Auto Power Off | After 10 Minutes |
| Power Supply | 3 x 1, 5V AAA (UM-4) |
| Operating Environment | 0°C ~ 50°C; <80% RH |
| Storage Environment | -10°C ~ 50°C; <70% RH |
Weight and Dimensions| Size (WxHxD) | 60 x 245 x 27mm |
|---|---|
| Weight | 220g |
Provides an overview of the PeakTech 5201 moisture meter and its applications.
Lists the main functionalities including display, measurement modes, and design.
Details the LCD display, measurement range, and resolution of the meter.
Covers penetration depth, low battery indication, auto power off, and power supply.
Specifies operating/storage environments, dimensions, and weight.
Identifies and describes each button and component on the meter's panel.
Explains the meaning of various symbols and values shown on the LCD screen.
Guides on how to turn on the meter and perform a moisture measurement.
Explains the influence of hand position on calibration and zeroing.
Provides guidelines on sensor placement, material composition, and interference.
Details moisture status (DRY, RISK, WET) for different materials.
Instructs on replacing the battery when the 'BAT' symbol appears.
Details how to enter alarm set mode and adjust RISK/WET thresholds.
Explains how to switch the display backlight on or off.
Steps for replacing the battery when indicated by the low battery symbol.
Notes on keeping the instrument dry, probes clean, and battery safety.
To Next Page
