PeakTech 5201 - Moisture Comparison and Usage Notes; Measurement Best Practices; Moisture Status Interpretation; Low Battery Warning

19
Moisture Table of Comparison
Construction Material
Display (Unit)
Moisture Status
Gypsum
<30
DRY
30-60
RISK
>60
WET
Cement
<25
DRY
25-50
RISK
>50
WET
Wood
<50
DRY
50-80
RISK
>80
WET
Note:
 If the ball head in corners, it maintain a minimum distance of 8
to 10cm from corner areas.
 The ball head must be kept perpendicular to the measured
material during the measurement, pressed firmly against the
surface and not slanted.
 Metal parts in the surface will falsify the measurement values.
Measure only in places that have the most homogeneous
possible material composition
 In the case of material thickness of les than 20mm, there is
the danger that moisture value. maybe the values is not
correct.
 If “BAT” appears in the display, the battery should be
replaced.