PeakTech 5201 User Manual

14
Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available
mild householder cleanser. Ensure that no water gets inside the
equipment to prevent possible shorts and damage to the
equipment.
Introduction
The PeakTech
®
5201 is a non-contact moisture meter with a high-
frequency measurement method. It is used for the non-destructive
testing of moisture in building materials of all kinds and for the
detection of moisture distribution in walls, ceilings and floors. This
practical tester is particularly suitable for pre-testing walls before
further processing by plastering, papering or painting, as well as
for the general assessment of the risk of mold in residential
buildings or for the search for moisture damage.
2. Features
► Quickly displays the moisture content of materials
► LCD display with white backlight
► Function for measuring the moisture of building materials
► Penetration depth 20-40mm
► Measuring and HOLD function
► MIN / MAX hold function
► Alarm function
► Battery status indicator and automatic switch-off
► Robust and handy housing design
► Measured value holding function

PeakTech 5201 Specifications

General

Display	LCD with automatic backlight
Resolution:	0.1
Measurement Range	0.0 ~ 100.0
Penetration depth	20 ~ 40 mm
DATA-HOLD	Holds measurement value in display
Low Battery Indication	Symbol “ “ shown in the display
Auto Power Off	After 10 Minutes
Power Supply	3 x 1, 5V AAA (UM-4)
Operating Environment	0°C ~ 50°C; <80% RH
Storage Environment	-10°C ~ 50°C; <70% RH

Weight and Dimensions

Size (WxHxD)	60 x 245 x 27mm
Weight	220g