PeakTech 5160 User Manual

6. Performing Measurement
1. Press the "MODE" button to switch to the maximum value mode.
The meter is now renewed only if the current measured value
exceeds the highest previous reading.
2. Press the "MODE" button again to switch to the average mode.
The display indicates the average wind speed over the entire
measurement.
3. Press the button again to switch back to the normal
measurement mode.
Automatic Power Off
If the device is no longer used it automatically turns off after 10
minutes.
Backlight
This unit features an automatic backlight, which activates when the
light sensor on the front panel detects low light conditions.
-15-

PeakTech 5160 Specifications

General

Brand	PeakTech
Model	5160
Category	Measuring Instruments
Language	English