Peavey AAM 802

Output Specifications:
Function Minimum Output Level Bal/ Connector
Load UnBal.
Ohms Min** Max
Main L/R 600 +4 dBu +22 dBu Bal. 1/4" TRS: Tip (+),
Ring (-)
Sleeve Ground
+4 dBu +22 dBu Bal. XLR: Pin 1 Ground
Pin 2 (+),
Pin 3 (-), (Bal.)
Monitors 600 +4 dBu +22 dBu Bal. 1/4" TRS: Tip (+)
Ring (-),
Sleeve Ground
+4 dBu +22 dBu Bal. XLR: Pin 1 Ground,
Pin 2 (+),
Pin 3 (-), (Bal.)
Mono 600 +4 dBu +22 dBu Bal. 1/4" TRS: Tip (+),
Ring (-),
Sleeve Ground
+4 dBu +22 dBu Bal. XLR: Pin 1 Ground
Pin 2 (+),
Pin 3 (-), (Bal.)
Effects 600 +4 dBu +22 dBu Unbal. 1/4" Phone: Tip (+),
Sends Sleeve Ground
Channel 600 +4 dBu +22 dBu Unbal. 1/4" TRS: Tip Send,
Insert Send Ring Return,
Sleeve Ground
Headphone 8 +4 dBu +22 dBu Unbal. 1/4: TRS: Tip Left,
(No load) Ring Right,
Sleeve Ground
Tape 2.2 k +4 dBu +22 dBu Unbal. RCA Phono
0 dBu=0.775 V (RMS)
Gain:
Mic Input Gain Adjustment Range: 10 dB to 58 dB
Mic Input to L/R Balance Output 78 dB (Max. Gain)
Mic Input Longest Path 93 dB (Max. Gain)
Line Input Gain Adjustment Range: -10 dB to 38 dB
Line Input to L/R Bal. Output 60 dB (Max. Gain)
Line Input to longest Path 73 dB (Max. Gain)
Stereo Line Input Gain Adjustment Range 10 dB
Stereo Line Input to L/R Balance Output 36 dB (Max. Gain)
Stereo Line Input Longest Path 46 dB (Max. Gain)
Aux Return to L/R Balance Output 34 dB (Max. Gain)
Frequency Response:
Mic Input to L-R Output 11 Hz to 42 kHz +0 dB/-1 dB
Total Harmonic Distortion (THD):
<0.008% 20 Hz to 20 kHz Mic to L-R Output (10 Hz to 80 kHz BW)