PRE GAIN (11)
Controls the input volume level of the Lead channel.
CHANNEL SELECT SWITCH (12)
Allows selection of the Lead or Normal channel.
NOTE: Channel selection may also be achieved by the remote footswitch. If remote selection is desired, the
channel switch must be in the “in” (Lead) position.
NORMAL GAIN (13)
Controls the volume level of the Normal channel.
INPUT (14)
The input jack will accept signals from all types of guitar pickups. Be sure to use a high-quality shielded
cable to connect the guitar to the amplifier.
EXIENSlON
REMOTE
A
30
WNTS
22v
RhlS
DESIGNED AND MADE IN MISSISSIPPI U.S.A.
-uI
SWITC”
18
OHM
MIIYIMUM
LOAD
THE HOME OF
THE
BLUES
EXTERNAL SPEAKER JACK (15)
A
Provided for the connection of external speaker cabinet. Minimum total impedance is 16 ohms.
REMOTE SWITCH JACK (16)
Provided for the connection of the optional remote footswitch. The footswitch is used to select the Lead or
Normal channels and defeat tremolo. When using the remote footswitch, always insert the plug fully (second
click) to ensure proper operation.
5
To Next Page
Loading...
