EasyManua.ls Logo

Peavey ESCORT 2000

Peavey ESCORT 2000
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Escort
2000 Specifications:
Output Power: 75 Watts per channel into 4 Ohm load
Frequency Response: 30 Hz to 25 kHz +0/-3 dB measured at 1 Watt
Overload Protection: DDT
(Distortion Detection Technology) limits the power amplifier input to prevent clipping
distortion that can damage speakers.
Tone Controls: Bass: 100 Hz +/- 10 dB
Treble: 10 kHz +/- 10 dB
Graphic Equalizer: 5 bands: 100 Hz, 350 Hz, 1 kHz, 3 kHz and 8 kHz
With FLS
®
(Feedback Locating System)
Input Impedance: Mic Input: 2 K Ohms
Line Input: 12 K Ohms
Distortion: Less than 0.8% THD at rated output
Max Gain: 86 dB mic input to speaker output
Signal/Noise Ratio: 85 dB mic input typical
Reverb: Digital
AC Power: 115 VAC 60 Hz or
230 VAC 50/60 Hz
Weight Assembled: 57 lbs.(25.9 Kg)
Dimensions: 14.5" H x 36.75" W x 15.5" D
(36.8H x 93.3W x 39.4D cm)
Speakers: Woofer 10" (254 mm)
Piezoelectric Horn Tweeter
Microphone: Dynamic, Cardioid (Unidirectional)

Related product manuals