Need help?Do you have a question about the Peavey IMPULSE 12 D and is the answer not in the manual?
General| Speaker Size | 12 inch |
|---|---|
| Frequency Response | 50 Hz - 20 kHz |
| Output Connectors | XLR |
| Type | Powered Speaker |
| Inputs | XLR |
| LF Driver Size | 12" |
| HF Driver Size | 1.4 inch |
| Outputs | XLR |
| Weight | 18 kg |
| Tweeter Size | 1.4" |
| Weight (kg) | 18 kg |
Explains the function and reset procedure for the 5 amp circuit breaker.
Details the IEC power cord connection and safety importance.
Details input connections, mic/line switching, gain control, and signal/clipping indicators.
Covers the DynaQ section for tone shaping, including Music/Speech and Contour settings.
Instructions and safety precautions for suspending or flying the speaker system.
Describes various ways to connect audio signals, including balanced and unbalanced inputs.
Explains how to adjust input gain levels and the effect of DDT™ indicators.
Addresses common problems like no output, hum/buzz, and distorted sound with solutions.
To Next Page
