Impulse
ª
200 Stacking Adapter
The Impulse
ª
200 Stacking Adapter is designed for free-standing enclosures only.
Do not attempt to use this adapter with enclosures that are flown or hanging.
Do not attempt to stack more than two enclosures as shown in the diagram below.
1. Set Peavey number
00386950 stacking adapter
on top of bottom speaker as
shown in this view.
2. Set feet of speaker to be
stacked in holes of stacking
adapter.
SIDE VIEW
ISOMETRIC VIEW
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301
(601) 483-5376 • FAX (601) 486-1278 • www.peavey.com
©1999 Printed in the U.S.A. 4/99
Need help?
General
