Need help?Do you have a question about the Peavey SP 2G and is the answer not in the manual?
General| Power Handling (Continuous/Program/Peak) | 400 W / 800 W / 1600 W |
|---|---|
| Impedance | 8 Ohms |
| Sensitivity | 98 dB |
| Weight | 60 lbs |
| LF Driver | 15" |
| HF Driver | 1.4" |
| Input Connections | 2 x 1/4" TRS, 2 x Speakon |
| Enclosure Material | Plywood |
| Grille | Metal |
| Type | 2-way full-range loudspeaker |
Comprehensive technical details including frequency response, power handling, SPL, impedance, and connectivity.
Details the plywood construction, carpet covering, corners, and protective grille.
Specifies the SA-1 stand mount provision on the bottom of the enclosure.
Provides the overall height, width, and depth in inches and centimeters.
States the total weight of the loudspeaker system in pounds and kilograms.
Highlights the Black Widow woofer, 22XT compression driver, Sound Guard, trapezoidal design, and stand mount.
Explains the two-way system design, trapezoidal shape benefits, materials, and protective grille.
Shows horizontal sound dispersion patterns at various frequencies (250 Hz to 8 kHz).
Shows vertical sound dispersion patterns at various frequencies (250 Hz to 8 kHz).
Details the dynamic circuit protecting the HF driver from overpowering.
Explains how frequency response is measured and the system's range.
Defines beamwidth and directivity factors derived from polar plots.
Describes the methodology for rating power handling and amplifier headroom.
Lists key A&E specs including bandwidth, output level, impedance, and dimensions.
Provides information on obtaining warranty statement details.
To Next Page
