Need help?Do you have a question about the Peavey SP 3 and is the answer not in the manual?
Measures 80 Hz to 16 kHz (+/- 3 dB) at 1 meter on axis in an anechoic environment.
150 watts continuous (34.6 VRMS), 300 watts program.
103.5 dB (1W @ 1m) in anechoic environment; 125 dB maximum.
Features a 15-inch Scorpion woofer and a CH™-2 compression driver.
Set at 800 Hz with 12 dB/octave slopes for both low and high pass filters.
Measures 26" W x 32½" H x 16" D, weighing 85 lbs (38.6 kg).
Derived from -6 dB polar plots, providing coverage characteristics for placement.
Measured at 1 meter in anechoic environment using a 2.82V swept sine input.
Discusses EIA RS-426A and its relation to real-world music spectral content.
Illustrates horizontal and vertical radiation angles at various frequencies.
Shows input connections and identifies power/impedance ratings.
Covers 80 Hz to 16 kHz with 103.5 dB output at 1 meter/1 watt.
States 8 ohms nominal impedance, 150W continuous, 300W program power.
Specifies 90° horizontal, 45° vertical coverage; 26" W x 32½" H x 16" D.
Provides details for a one-year limited warranty.
To Next Page
General
