Peavey SP 5X User Manual

SP
™
5X
SPECIFICATIONS
Frequency response, 1 meter on-
axis, swept-sine in anechoic
environment:
68 Hz to 16 kHz (±3 dB)
Usable low frequency limit
(-10 dB point):
52 Hz
Power handling:
Full Range:
350 W continuous
700 W program
1,400 W peak
Sound pressure level, 1 Watt,
1 meter in anechoic environment:
Full Range:
99.0 dB SPL, (2.83 V input)
Maximum sound pressure level
(1 meter):
Full Range:
124 dB SPL continuous
132 dB SPL peak
Radiation angle measured at -6 dB
point of polar response:
90 degrees horizontal by 45 degrees
vertical
Transducer complement:
Low Frequency Section:
1x 15 in.
SP-15825 Scorpion
®
Plus woofer
High Frequency Section:
1x .875 in. exit/51mm voice coil
RX
™
22 compression driver on a CD
horn
Box tuning frequency:
Low Frequency Section:
51 Hz
Crossover frequency (internal
passive):
Low Frequency - High Frequency:
1,800 Hz
Impedance (Z):
Full Range:
Nominal: 8.0 Ω
Minimum: 6.7 Ω
Input Connections:
2x 1/4" phone jack
Enclosure materials and finish:
3/4" novaply finished in black carpet
Mounting provisions:
This unit is not designed for overhead
suspension.
SA-1 stand mount adaptor built-in, and
four large rubber feet on bottom for
floor use.
Dimensions (H x W x D):
Front:
28.00 in. x 18.94 in. x 18.31 in.
711 mm x 481 mm x 465 mm
Rear:
28.00 in. x 13.00 in. x 18.31 in.
711 mm x 330 mm x 465 mm
Net Weight:
70 lbs. (31.8 kg)
Features:
• 15" Scorpion Plus woofer with field-
replaceable basket
• RX
™
22 compression driver with
ferrofluid cooling
• 700 W program, 1400 W peak
• Sound Guard
™
III tweeter protection
• Trapezoidal enclosure
• Stand mount adaptor
Description
The latest version of the SP 5 has the
new RX 22 high frequency compression
driver incorporated, as well as a very nice
looking cabinet design. The SP 5X is a
two-way speaker system comprised of a
15" Scorpion Plus woofer with a Kevlar
®
impregnated cone, and an RX 22
compression driver loaded onto a CH
®
3
constant directivity horn.
SPECS
PEAVEY ELECTRONICS

Peavey SP 5X Specifications

General

Brand	Peavey
Model	SP 5X
Category	Speakers
Language	English

Summary

Product Specifications Overview

Frequency Response

Specifies the frequency range from 68 Hz to 16 kHz (±3 dB) at 1 meter, with a usable low frequency limit of 52 Hz.

Power Handling Capabilities

Details power handling: 350W continuous, 700W program, and 1,400W peak.

Sound Pressure Level Information

Provides SPL: 99.0 dB (1W/1m) and max SPL of 124 dB continuous / 132 dB peak.

Transducer and Crossover Details

Lists transducer complement (15" woofer, RX™22 driver) and crossover frequency at 1,800 Hz.

Physical and Electrical Specifications

Includes impedance (8.0 Ω nominal), connections (2x 1/4"), enclosure, dimensions, and weight (70 lbs).

Key Product Features

Highlights 15" Scorpion Plus woofer, RX™22 driver, Sound Guard™ III protection, and trapezoidal enclosure.

Technical System Description

Enclosure Design and Materials

Describes trapezoidal enclosure reducing standing waves, 1/4" particle board, black carpet, and corner caps.

Driver Technology Explained

Details the 15" Scorpion Plus woofer with Kevlar cone and RX™22 driver with ferrofluid cooling & Radialinear system.

Crossover System Functionality

Explains the passive crossover with Sound Guard™ III tweeter protection for driver protection and EQ.

Architectural & Engineering Specs

Summarizes key specs: 68 Hz-16 kHz response, 99.0 dB (1W/1m), 8.0 Ω nominal impedance, 70 lbs weight.

Warranty Information

Provides details on the 3 + 2 year limited warranty and how to obtain a copy.

Input and Connection Details

Speaker Input Configuration

Details that the SP™ 5X has full range inputs in parallel via two 1/4" phone jacks.

Safety Warning for High Output

Warns that the speaker system can permanently damage hearing and advises extreme care with loudness.