To Next PageTo Next Page
Need help?Do you have a question about the Peavey PVX p 15 and is the answer not in the manual?
General| Frequency Response | 50 Hz - 20 kHz |
|---|---|
| Sensitivity | 98 dB |
| Impedance | 8 Ohms |
| LF Driver Size | 15 inches |
| HF Driver Size | 1.4 inches |
| Frequency Range | 50 Hz - 20 kHz |
| Maximum SPL | 128 dB |
| Outputs | XLR |
| Inputs | XLR/1/4 inch combo jack |
Statement on compliance with FCC radiation exposure limits for uncontrolled environments.
Statement on compliance with IC radiation exposure limits for uncontrolled environments.
Highlights key features and technical specifications of the PVX™p 15 Bluetooth® speaker system.
Detailed overview of the PVX™p 15 Bluetooth® speaker system's design and capabilities.
Instructions for replacing the unit's AC power line fuse, including type and value.
Details on input jacks and controls for gain adjustment on channels 1, 2, and 3.
Important safety precautions for operating the speaker system, including ventilation and feedback prevention.
Critical safety information for suspending the speaker, including structural engineer consultation and hardware.
Defines insert groups (M10, M8) and specifies mating hardware requirements.
Guidelines for connecting AC power, using extension cords, and power sequencing.
Precautions and guidelines for mounting the speaker on a stand or pole.
Advice on connecting audio signals via various inputs and proper cable usage.
Detailed guide on adjusting input sensitivity and gain structure for optimal performance.
Explanation of how level indicator bars on the LCD screen display signal levels.
Details on adjusting EQ bands (High, Mid, Low) and the High Pass Filter for Channel 1.
Explains different EQ presets (Normal, Live, Club, Speech) for various audio applications.
Describes location-specific EQ adjustments (Bracket, Pole, Monitor) for optimal sound.
Configuration of signal delay for specific applications like delay towers or side fills.
Selection of output modes (Mix Out, Link Out) for signal routing.
Steps to disable the Bluetooth® LED when the feature is not in use.
Options for controlling the speaker via a mobile app (On, Off, Secondary).
Instructions for enabling and configuring Bluetooth® audio streaming.
Guide to linking two PVX™™p speakers for stereo or mono operation.
Step-by-step guide for connecting via Bluetooth® for audio streaming.
Step-by-step guide for connecting via Bluetooth® for app control.
Controls for dimming the LCD display and managing the front panel LED status.
Accessing model info, firmware version, and restoring factory defaults.
Diagnosing and resolving issues related to lack of output, hum, or buzz.
Guidelines for cleaning, touch-up, and checking hardware for long-term reliability.
Summary of key performance metrics like frequency range, SPL, and sensitivity.
Information on speaker drivers, crossover frequency, and crossover slopes.
Details on input/output connections, enclosure materials, and mounting provisions.
Specifications for internal amplifiers, power ratings, and input impedance.
Details on DSP processing, latency, and infrasonic filter protection.
Physical dimensions and net weight of the speaker system.
Nominal power consumption and voltage requirements for the system.
Specifications for amplifier frequency response, hum, and noise levels.
Details on power requirements and distortion (THD/IM) for the system.
