Peavey PVX p 10

2
Features and specifications are subject to change without notice.
Peavey Electronics Corporation • 711 A Street • Meridian, MS 39301
(601) 483-5365 • FAX (601) 486-1278 • www.peavey.com
© 2015
EX000030
FCC/ICES Compliancy Statement
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS Standard(s). Operation
is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, that may cause undesired operation.
Le présent appareil est conforme aux CNR d’lndustrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes: (1) I’appareil ne doit pas produire de brouillage, et (2)
I’utilisateur de I’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
Warning: Changes or modifications to the equipment not approved by Peavey Electronics Corp. can void the user’s
authority to use the equipment.
Note – This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try and correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con
-
nected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled envi-
ronment.

Peavey PVX p 10 Specifications

General

Brand	Peavey
Model	PVX p 10
Category	Speakers
Language	English

Summary

Safety and Compliance

FCC and IC Compliance Statements

Details FCC Part 15, IC RSS standards, and compliancy conditions for device operation.

Radiation Exposure Statements

Outlines FCC and IC radiation exposure limits and installation guidelines for safe operation.

General Safety Precautions

Provides essential cautions regarding power, ventilation, feedback, and handling to prevent damage or injury.

Mounting and Flying Safety

Safety guidelines for suspending speakers, including hardware specifications and torque recommendations.

Product Overview

Features and Description

Highlights key features, technical specifications, and a detailed description of the PVXmP 10 Bluetooth speaker system.

Applications

Explores various uses for the speaker system, such as sound reinforcement, public address, and side fill.

Operation and Controls

Rear Panel Layout and Connections

Identifies rear panel components including fuse, IEC power connection, and ON/OFF switch.

InputOutput Jacks and Level Controls

Details input jacks (XLR/TRS, AUX), output jack, level controls, and MIC/LINE switches.

DSP Menu and Parameter Adjustments

Guides users through the DSP menu for adjusting master/channel levels, EQ, filters, mode, location, delay, and output.

Bluetooth and Connectivity Settings

Explains how to control Bluetooth features like App Control, Streaming, linking speakers, and auto-linking.

Configuration Menu Options

Covers settings within the Config Menu, such as Display Dim, Auto Link, and Front LED behavior.

Troubleshooting and Maintenance

Common Operational Issues and Solutions

Addresses problems like no output, hum, buzz, distortion, and thermal shutdown with troubleshooting steps.

Care and Cleaning Procedures

Provides instructions for cleaning, protection, and general maintenance of the speaker system.

Technical Specifications

Architectural and Engineering Specifications

Details system design, materials, dimensions, and transducer complements.

General and Amplifier Specifications

Lists frequency response, sensitivity, SPL, power ratings, impedance, and DSP specifications.