Peavey PVX p 10 - Product Overview; Features and Description

Loudspeaker System Specifications
1
PVX™p 10 Bluetooth®
Cover Page (With Picture & Logo)
Make sure it's the one with no handle showing on the left side of the cabinet.
PVX™p 10 Bluetooth®
Thank you for purchasing the powered Peavey® PVX™p 10 Bluetooth® speaker
system. The PVX™p 10 Bluetooth® features an reliable bi-amped power section
that provides a total of 520 Watts of peak dynamic power with DSP based
compression and limiting. Featuring a 10” heavy-duty woofer with a 2 3/8 inch
voice coil and 50 ounce magnet, and the RX™10 compression driver with a 1
inch titanium diaphragm on a 100 degree horizontal x 60 degree vertical pattern
asymmetrical horn. The PVX™p 10 Bluetooth® provides two channels with a
balanced input via a combination jack that accepts balanced TRS 1/4 inch input
as well as a balanced XLR input. A switch is provided to change between line
level gain and mic level gain. A third channel is for a Bluetooth® source, or
alternatively a 1/8" AUX input jack. Each channel has an adjustable Level
control, and a three-band EQ section. There is a balanced output, a Male XLR,
that can feed the mixed signals from the three channels out to another
component. A front baffle LED indicator that can be set to light when power is
on, and when the “soft-limiting” DDT circuit is activated, or turned off altogether.
The LCD display and EQ presets, along with other DSP operating parameters
are accessed via a one-knob selector.
Features
* Two-way bi-amped sound reinforcement enclosure
* 10” heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet
* RX™10 compression driver, with 1 inch titanium diaphragm
* Reliable fan-cooled power amps with DSP protection
* Total of 520W peak dynamic power
* DSP control for precise crossover, EQ and limiting functions
* DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-
precision
* Peavey's Quadratic Throat Waveguide™ technology, 100 by 60 degree
coverage
* Asymmetrical horn aims the sound down 10 degrees, at the audience, not
over their heads
* Bluetooth® input is via a dedicated input channel
* Analog input is via a combo female XLR and 1/4” TRS phone jack with
balanced input
* Three channels in total, two for analog, and one for Bluetooth or AUX input via
a 1/8" jack