Peavey ProSys 115HC User Manual

Controls AC power to system electronics; reversing hot/neutral lines can reduce hum.

Illuminates when AC power is supplied to the unit and the ON-OFF-ON switch is active.

High impedance, balanced jacks accept line level signals via XLR or 1/4" (RTS) phone jack.

Parallel jacks provide ability to send or daisy-chain the audio signal to other devices.

Controls the gain or level of the Prosys 115 HC system.

Indicates activation of Peavey's DDTTM compression feature for overload protection.

Specifies AC power line fuse type, rating, and replacement procedure for safety.

Do not block heat sinks or bottom vents to prevent improper functioning and damage.

Avoid excessive mixer bass boost; let DDT handle compression for proper dynamic range.

Do not remove grille; use mixer to combine signals, do not daisy-chain multiple sources.

System can damage hearing; use extreme care with loudness settings; peak SPLs exceed 126 dB.

Discusses using the ON-OFF-ON switch and shield connections to resolve hum.

Details using the SA-1 stand adaptor for improved coverage and positioning.

Guides adjusting volume for optimal mixer compatibility and DDT effectiveness.

Outlines various uses including sound reinforcement, public address, and stereo playback.

Details permissible noise exposure levels and recommends hearing protection.

Covers defects in material/workmanship for one year, excluding certain components.

Provides a 90-day warranty specifically for tubes and meters included in the product.

Outlines conditions, exclusions, and limitations that may void or affect warranty coverage.

Provides instructions for completing and mailing the warranty registration card.