Peavey KB/A 60

ENGLISH
Thank you for selecting the KB/A ™ 60 Keyboard Amplification System! The KB/A 60 is the perfect
keyboard/acoustic system for applications where excellent sound and portability in a lighter package are
needed. Plus, with 50 watts RMS available, the KB/A 60 will handle just about any application. Power
output is tightly controlled via DDT ™ circuitry which virtually eliminates amplifier clipping. Two
channels with high and low gain inputs (1/4" jacks ) are provided along with a four-band equalization
section that is global for both channels.
Channel one offers a gain switch that allows the input to be boosted 12dB. The Send/Return (pre-EQ)
jack on the front panel is available for adding external effects or processor devices to the signal chain.
Power Amp In and Preamp Out jacks are also provided on the front panel. A master reverb control
allows you to dial in ambiance as needed. Rear panel features include the all-important headphone jack
and three position ground lift switch.
Like all of the KB/A series, the KB/A 60 is built for the road. A tough black covering borrowed from the
Transtube® series is provided along with heavy-duty comers. A handle is available at the top of the unit
to make transporting it a breeze, and heavy-duty rubber feet are provided to protect the bottom.
The amp is for real...it’s all there...excellent sound, portability, roadworthy design, and unmatched
reliability. And, don’t forget...with every KB/A series amplifier, you get Peavey’s excellent one-year
warranty and the best in customer service from Peavey’s award winning repair and service department.
CHANNEL ONE
1. HIGH GAIN INPUT
Used for instrument and microphones with a low level output. It is 6dB louder than the Low Gain
input.
2. LOW GAIN INPUT
Provided for instruments that have high outputs, which can result in overdriving (distorting) the
High Gain input. If both inputs are used simultaneously, the output levels are the same (both are
Low Gain).
3. GAIN SWITCH
Boosts the gain of channel one by 12dB. Depress to the “in” position to activate.
4. LEVEL
Controls the Channel One 1/4” phone jack input level.