7
(11) Outputs to Satellite Speakers
Stereo outputs for the satellite speakers.
(12) AC POWER INLET
is is the receptacle for an IEC line cord, which provides AC power to the unit. Connect the line cord to this
connector to provide power to the unit. Damage to the equipment may result if improper line voltage is used.
(See line voltage marking on unit).
Never break o the ground pin on any equipment. It is provided for your safety. If the outlet used does not
have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded
properly. To prevent risk of shock or re hazard, always make sure that the amplier and all associated
equipment is properly grounded.
(13) LINE VOLTAGE SELECT SWITCH
is selector switch allows the amplier to be operated at dierent line voltages. Please be sure this switch is set to
the proper voltage for your area before connecting the amplier to a power source or turning the amplier on for
the rst time.
NEVER CHANGE THE POSITION OF THIS SWITCH WHILE THE System IS TURNED ON.
(14) ON-OFF SWITCH
is rocker switch supplies AC power to the system when switched to the ON position. e ON position is with
the right side of the switch pushed “in” or nearly ush with the rear panel.
Bluetooth Function
In order to utilize the Bluetooth control function of the LN™ 1263, download the Peavey® LN™ 1263 app onto
your iOS device. Connect your device via Bluetooth to the LN™ 1263. Once you open the app, you will have ac-
cess to the following control screens:
Main Mixer Control Screen Individual Channel Equalization (Simple Mode)
To Next Page
Loading...
