Peavey Q 215F

Alerts users to dangerous voltage within the enclosure and the risk of electric shock.

Emphasizes referring servicing to qualified personnel and not opening the unit.

Details the 15-band 2/3-octave constant 'Q' filters for each channel.

Explains the LEDs that indicate frequency bands experiencing feedback.

Describes the calibrated control for regulating overall gain of the equalizer section.

Explains the high-pass filter that rolls off low frequencies at 40 Hz.

Indicates when the low cut filter is engaged, showing a 12 dB per octave roll-off.

Illuminates when the bypass switch is active, indicating EQ and gain controls are bypassed.

Routes the input signal directly to the output, bypassing EQ and gain controls.

Displays the output level using a multicolored LED ladder.

Used to turn the AC mains power for the unit on or off.

Describes the 1/4" Tip-Ring-Sleeve (stereo) jacks for balanced/unbalanced outputs.

Describes the 1/4" Tip-Ring-Sleeve (stereo) jacks for balanced/unbalanced inputs.

Covers defects in material and workmanship for one year, with specific exclusions.

Provides a 90-day warranty specifically for tubes and meters within the product.

Details terms that void the warranty and lists exclusions or limitations.

Instructs users on how to complete and submit the warranty registration card.

Covers safe operation, ventilation, power connection, and cleaning procedures.

Warns about permanent hearing loss from high noise levels and recommends protective measures.