Need help?Do you have a question about the Peavey PV 215 EQ and is the answer not in the manual?
General| Type | Graphic Equalizer |
|---|---|
| Number of Channels | 2 |
| Frequency Bands | 15 |
| Equalization Range | ±12 dB |
| Input Connectors | XLR and 1/4" TRS |
| Output Connectors | XLR and 1/4" TRS |
| Signal to Noise Ratio | > 90 dB |
| Total Harmonic Distortion | < 0.1% |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Power Supply | Internal |
| Frequency Range | 20 Hz to 20 kHz |
| Input Impedance | 20 kOhms balanced, 15 kOhms unbalanced |
| Dimensions | 19" x 1.75" x 7.5" (483 x 44 x 191 mm) |
Overview of the Peavey PV 215EQ graphic equalizer, highlighting its dual-channel design.
Lists the technical specifications and functionalities of the PV 215EQ, including filter sets and controls.
Explains the recommended procedure for using the equalizer controls to achieve desired sound adjustments.
Details the function of each control and indicator on the front panel, including Level Meter, Level Control, Filters, Bypass, and Power.
Describes the IEC mains connector, ground lift switch, XLR inputs, and XLR outputs on the rear panel.
Details what the Peavey warranty covers, what it excludes, and its duration for different product categories.
Provides instructions on how to get warranty service and discusses limitations on implied warranties and damages.
To Next Page
