Need help?Do you have a question about the Peavey Rage 158 and is the answer not in the manual?
General| Power Output | 15 Watts RMS |
|---|---|
| TransTube Technology | Yes |
| Headphone Jack | Yes |
| Weight | 16 lbs (7.26 kg) |
| Speaker | 1 x 8" Blue Marvel speaker |
| Channels | 2 (Clean and Lead) |
| Equalization | Low, Mid, High |
| Input | 1/4 inch |
| Technology | TransTube |
| Controls | Low, Mid, High, Channel Select Switch |
| Type | Solid State |
General safety instructions for electrical product usage, handling, and installation.
Information on safe noise exposure limits and the need for hearing protection.
Connects the unit to the AC power supply. Use a grounded connection.
Controls the unit's power and indicates power status.
Accepts signals from guitar pickups. Use a shielded cable.
Adjusts the clean channel volume level.
Selects between Lead and Clean channels.
Adjusts Lead channel gain, overall volume, and allows external audio input.
Includes voicing switch, EQ, and headphone jack.
Provides example settings for different musical styles.
Details on rated power, clipping, and harmonic distortion.
Details on input impedance and levels for preamp and CD/Tape.
Details on load impedance and nominal power output.
Specifies system noise levels relative to input level.
Details the passive EQ type.
Illustrates the signal path within the amplifier unit.
Specifies what is covered and not covered by the Peavey warranty.
Outlines warranty periods and how to obtain service.
Details limitations on implied warranties and damage exclusions.
Collects customer details and feedback for warranty registration.
To Next Page
