Need help?Do you have a question about the Peavey Session 500 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Effects | Reverb |
| Speaker Configuration | 1 x 15" |
| Dimensions | 24" x 22" x 12" |
| Amplifier Type | Solid State |
| Type | Guitar Amplifier |
| Speaker | 15" |
| EQ | 3-band |
| Inputs | 1/4" input |
| Outputs | XLR Direct Out |
| Power Output | 500W |
| Power Output RMS | 500 W RMS into 4 Ohms |
Details the dual inputs and the innovative pedal volume integration for tonal consistency and reduced noise.
Covers Pre Gain for input stage control and String Effect for violin-like sounds or distortion.
Explains Low EQ, Parametric Midrange, Frequency Shift, High EQ, and Presence controls for tonal shaping.
Details the Phase circuitry, including Color and Rate controls for modulation effects.
Covers Post Gain for output level, Reverb for echo effects, and Variable Crossover for bi-amping.
Explains DDT Compression LED, Pilot LED, and the Bi-Amping feature for advanced sound systems.
Details Fuse, Power Switch, Speaker Outputs, and Power Amp Input for system expansion.
Covers Line Out, Balanced Line Out for consoles, and Preamp Send/Return for effects.
Explains the Remote Switch socket for control and Crossover Outputs for bi-amping.
Describes Headphone Jack usage and important safety cautions regarding airflow and power.
Lists detailed technical specifications for power, frequency response, distortion, and input/output levels.
To Next Page