Peavey Triumph PAG 60 - Page 3

ENGLISH
HIGH GAIN INPUT (1)
Used for most electric guitars. It is 6 dB louder than the Low Gain input.
LOW GAIN INPUT (2)
Provided for instruments that have extremely high outputs, which can result in overdriving (distorting) the
High Gain input. If both inputs are used simultaneously, the output levels are the same (both are Low Gain).
CLEAN GAIN (3)
Controls the channel volume.
BRIGHT SWITCH (4)
Provides a preset boost to treble frequencies. To activate, depress the switch to its “in” position. The bright
function affects only the clean channel.
CHANNEL SELECT SWITCH (5)
Allows selection of the Ultra or Clean channel and the “out” position selects Clean.
NOTE: Channel selection may also be accomplished by the remote footswitch. If remote selection is desired,
the channel switch must be in the “in” (Ultra) position.
LOW, MID, & HIGH EQ (6)
Passive tone controls that regulate the low, mid and high frequencies, respectively.
PRE GAIN (7)
Controls the input volume level of the channel.
POST GAIN (8)
Controls the overall volume level of the channel. The final level adjustment should be made after the desired
sound has been achieved.
ULTRA GAIN SWITCH (9)
Boosts the overall system gain of the Ultra channel. Depress to the “in” position to activate.
CRUNCH GAIN SWITCH (10)
Boosts the overall system gain of the Crunch channel. Depress to the “in” position to activate.