Need help?Do you have a question about the Peavey UMA 150T II and is the answer not in the manual?
General| Power Output | 150 Watts |
|---|---|
| THD | < 0.5% |
| Signal to Noise Ratio | > 90 dB |
| Frequency Response | 50 Hz - 15 kHz |
| Weight | 10.4 kg |
| Power Requirements | 120V AC 60 Hz |
| Impedance | 4 Ohms |
Details on front panel controls including level, EQ, master volume, contour, and power switch for audio system operation.
Explanation of front panel LEDs indicating power status, signal activity, SPST™ active, and mute line status.
Description of various input connectors on the back panel, including screw terminals, XLR, and RCA jacks for microphones and line level signals.
Details on back panel terminals for page and channel mute threshold controls, external volume control, and muting functions.
Information on the 24 V DC output terminals provided for powering low current external equipment.
Specifications for various audio outputs including RCA jacks, loop out, and transformer-isolated outputs for different speaker systems.
Details on AC outlet, fuse, and line cord, important for power management and safety of the audio system.
Guidelines for proper ventilation and installation in rack cabinets to ensure optimal performance and cooling.
Detailed technical specifications for the UMA 75T II mixer amplifier, covering inputs, outputs, power, and performance metrics.
Detailed technical specifications for the UMA 150T II mixer amplifier, covering inputs, outputs, power, and performance metrics.
To Next Page
