Need help?Do you have a question about the Peavey VSX and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Delay | Yes |
| Limiter | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Frequency Range | 20 Hz - 20 kHz |
| Display | LCD |
| Presets | Yes |
| Frequency Bands | 2-way, 3-way, 4-way |
| Crossover Type | Linkwitz-Riley |
| EQ | Parametric |
| Inputs | XLR, 1/4" TRS |
| Outputs | XLR |
| Slope | 12 dB/octave, 24 dB/octave |
| Input Impedance | 10 kΩ |
| Output Impedance | 100 Ω |
| Power Supply | 100-240 VAC, 50/60 Hz |
Covers gain optimization, clip indication, and 40 Hz low-frequency roll-off.
Details bandpass level compensation and crossover frequency selection.
Describes the power LED and power switch operation.
Details XLR and 1/4" balanced/unbalanced input and output connectors.
Covers the line cord, grounding, and power requirements.
Guides through setting reference efficiency, bandpass levels, and crossover frequencies.
Covers activating the 40 Hz filter and final gain adjustment for optimal performance.
Typical settings for biamped systems like SP-2Ti, Internationals, etc.
Typical settings for triamped systems, including crossover and level adjustments.
Details controls, frequency response, output levels, distortion, noise, and input specifications.
Covers hearing protection, operational cautions, and general safety guidelines.
Outlines warranty terms, conditions, exclusions, and duration.
Provides instructions for warranty registration and address changes.
To Next Page
