Peavey VTM-120 User Manual

High Gain and Low Gain inputs for connecting instruments, controlling input volume.

Pre Gain, Post Gain, and Low, Mid, High EQ for shaping amplifier tone.

Switches like Gain 1, Gain 2, Comp, Low 1/2, and Mid for altering tube amp response.

Presence control for high frequencies and effects send/return jacks for external processors.

Status LEDs, Power LED, Standby switch, and main Power switch for operation.

Safety features including a 3-wire line cord and accessible fuse holder.

Three-position switch to minimize audible hum or noise.

Jacks for connecting speaker enclosures of various impedances (16, 8, 4 ohm).

Control to minimize hum and output for connecting to other amps or remote standby.

Specifications for power amp, preamp tubes, and their respective sections.

Details on rated power, clipping power, and frequency response characteristics.

Specifications for input levels, effects loop, and system hum & noise.

Details on EQ controls, Presence boost, and response modification dip switches.

Specifications for power amp, preamp tubes, and their respective sections.

Details on rated power, clipping power, and frequency response characteristics.

Specifications for input levels, effects loop, and system hum & noise.

Details on EQ controls, Presence boost, and response modification dip switches.

Details on the one-year limited warranty and 90-day warranty for tubes/meters.

Outlines conditions that void the warranty and specific exclusions.

Instructions for warranty registration, proof of purchase, and obtaining service.

Information on dangers of high noise levels and recommended hearing protection.

Essential safety and operating instructions to read before use.

Precautions regarding power supply, grounding, ventilation, and placement.

Guidelines for cleaning, checking cords, and when to seek qualified service.