POWER SECTION
(400 SC Module with DDT
™
)
Frequency Response:
+0, -1 dB, 20 Hz — 20 kHz @ rated power
Rated Power:
• 210 watts RMS into 4 ohms, both channels
driven
• 150 watts RMS into 8 ohms, both channels
driven
• Bridge out 420 watts into 8 ohms*
*8 ohms minimum load for bridge output only
Total Harmonic Distortion:
Less than .01% @ 1 kHz @ rated power
DDT
™
Dynamic Range:
Greater than 26 dB
DDT
™
Maximum Distortion:
Below 0.5% THD for 6 dB overload
Below 1% THD for 20 dB overload
Hum and Noise:
-97 dB below 210 watts
Damping Factor:
Greater than 100 @ 1 kHz, 4 ohms
Input Sensitivity:
1.5 V RMS for 210 watts @ 4 ohms
Input Impedance:
2 k ohms
Power Requirements:
600 watts, 120 V AC, 60 Hz
Dimensions:
Width: 19.125"
Height: 10.875"
Depth: 11.0"
Weight: 35.2 lbs.
XR
®
600F/400 SC AMPLIFIER SPECIFICATIONS
To Next Page
Loading...
