Need help?Do you have a question about the Peavey XR 800FPlus and is the answer not in the manual?
General| Brand | Peavey |
|---|---|
| Model | XR 800FPlus |
| Category | Music Mixer |
| Language | English |
Alerts users to dangerous voltages, risks of electric shock, and servicing instructions.
Advises against exposure to rain/moisture and emphasizes reading the operating guide.
Covers basic electrical safety, grounding, and general usage guidelines for the apparatus.
Details installation precautions, servicing requirements, and UK-specific wiring instructions.
Warns about potential hearing loss from high noise levels and recommends hearing protection.
Introduces the XR 800F+ mixer, highlighting its 9-channel design and key features.
Explains the AC power inlet, main power switch, and the importance of the fuse.
Details the parallel speaker outputs and safe impedance connection guidelines.
Describes direct inputs to the graphic equalizers and power amp section.
Details the Left, Right, Monitor, and EFX outputs for external connections.
Explains the function of the EFX Defeat jack for controlling internal effects.
Details the Effects Peak LED and how to select effect presets.
Explains the Time/Size and Color/Tone controls for adjusting effects.
Describes how to control the amount of effects sent to monitor and main mixes.
Covers the Feedback Locator System (FLS) LEDs and the nine-band graphic equalizers.
Explains the switch for configuring stereo or dual mono amplifier modes.
Details the power indicator light and signal level meters for monitoring output.
Sets the overall level for the monitor signal sent to the monitor output.
Controls the master level for the Left and Right signals sent to the output jacks.
Describes the 1/4" line input and XLR mic input for channels 1-6.
Details the Gain, Hi EQ, Mid EQ, and Lo EQ controls for individual channels.
Covers Monitor send, Digital Effects level, Pan control, and Peak LED.
Sets the signal level for the channel sent to the Left and Right bus.
Describes the stereo line inputs for channels 7 and 8.
Details the stereo RCA tape input and output jacks for channel 9.
Explains the 48V phantom power switch and essential operating precautions.
Provides a detailed block diagram illustrating signal flow and component interaction.
Illustrates how to connect various external audio devices to the mixer.
Details input impedance, gain ranges, and input levels for various inputs.
Specifies output levels and minimum load impedance for main, monitor, and effects outputs.
Provides detailed gain adjustment ranges for microphone and line inputs.
Details frequency response, total harmonic distortion, and graphic equalizer characteristics.
Specifies hum and noise levels, signal-to-noise ratio, and crosstalk performance.
Details power output, load ratings, frequency response, and THD.
Provides physical dimensions, weight, input impedance, and damping factor.
Outlines what the warranty covers, what it does not cover, and who is protected.
Provides instructions on how to get warranty service and where to send defective items.
Details limitations on implied warranties and consumer rights.
To Next Page
