POWER SECTION
(1200 SC Module with DDT
™
)
Power and Load:
500 W RMS per channel into 4 ohms
360 W RMS per channel into 8 ohms
Frequency Response:
20 Hz—20 kHz +0 dB/-1 dB
Total Harmonic Distortion:
<0.1% at rated output @ 1 kHz
DDT
™
Dynamic Range:
Greater than 26 dB
DDT
™
Maximum Distortion:
Below 0.5% THD for 6 dB overload
Below 1% THD for 20 dB overload
Hum and Noise:
-97 dB below 500 Watts
Damping Factor:
Greater than 100 @ 1 kHz, 4 ohms
Input Impedance:
2 k ohms
Power Requirements:
Dom.: 120 V AC 60 Hz 500 W Nom.
Exp.: 220-230 V AC 50/60 Hz 500 W Nom.
Exp.: 240 V AC 50/60 Hz 500 W Nom.
Dimensions (H x W x D):
7" x 19" x 15.75"
(17.78 cm x 48.26 cm x 4.44 cm)
Weight:
44.8 lbs. (20.32 kg)
17
To Next Page
Loading...
