LED Codes
The LED with the triangle symbol will give a quick flash every time a
command has been sent to the Pebble, or when the temperature is updated and
indicates it is receiving information from the Wi-Fi network. If the Heat-pump /
Air-con does not respond, check the following as the system uses infrared
signals just like your other remote controlled appliances (eg. TV).
CHECK:
The correct make and model of remote been selected in the ‘Settings’ page on
the Pebble Air app (as per page 12).
There is a direct line of sight between the Pebble and the heat-pump / air-con
The Pebble is not facing direct sunlight
To Next Page
Loading...