Internal Temperature Sensor
The Pebble unit has a built-in temperature sensor that will measure the
temperature at its location. The sensor and software have been engineered to
work on an average over a period of time and will not react to every small
temperature changes.
The temperature will display in the Pebble Air app on your smart phone “Room
Temp xx “
Where possible do not…
• Place the Pebble unit in direct sunlight.
• Have light (especially halogen light) close to and shining directly onto the
Pebble unit.
• Place the Pebble onto the top of a heat source (e.g. microwave,
refrigerator).
To Next Page
Loading...