PACKING LIST
PECRON DC1242-500 *1 Input Connection Cable
(approx. 5 meters) *1
Mini Screwdriver *1 User Manual *1
XT90
WARNINGS
1：Make sure to connect the input and output cables according to the instructions;
2：Do not block the fan vent when the car charger is working;
3：Do not subject this product to mechanical impact
4：The output terminal of this product is not allowed to be short-circuited;
5：Make sure the car is started before turning on the car charger. Prevent the car battery from entering an under-voltage
protection state due to insufficient supply voltage;
6：Use standard and original charging cable of this product to avoid abnormalities.
7：Install and use this product in a dry, clean environment with suitable temperature.
Please read the user manual thoroughly before using this product, and keep this manual in a safe place for future
reference. Failure to follow the instructions for proper set up, use, and care for the device can increase the risk of serious
personal injury, death, or property damage. Once you use this device, you are deemed to have understood, recognized
and accepted all terms and contents of this document. The user shall be responsible for his own actions and all
consequences arising from failure to use the device in accordance with the “User Manual”, or as authorized in
PECRON's current product literature.
In compliance with laws and regulations, PECRON reserves all rights for final explanation, and to change these terms and
conditions at any time without prior notice. In the event that any revisions are made, the revised terms and conditions
shall be posted on our website immediately, please visit our website to inform yourself of any changes.
DISCLAIMER
support@pecron.com
To Next Page
Loading...