EasyManuals Logo

Pedego Interceptor User Manual

Default Icon
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Pg. 18 Pg. 19
Gears

is for easier and uphill pedaling, and the last gear is for
maximum speed on level or downhill terrain. Change
gears only while pedaling. The rear wheel contains seven
chain sprockets. When the chain is around the largest
sprocket, you are in 1st gear, or the lowest gear. The high
gear will have the derailleur positioned so that the chain is
directed around the smallest gear.
Every position on the gear selector should cause a gear change. Adjustments require


to the last gear or vice versa. If you change multiple
gears too quickly, you could have the chain come off
the front sprocket.
The fuse is designed to protect the battery. If the fuse blows,
there will be no power to any of the electrical components
powered by the battery. You can replace the fuse with a stan-
dard automotive 40 amp fuse or contact Pedego customer
service at support@pedego.com.
The fuse is located on the bottom of the battery, between the
charging port and the On/Off switch (Figure 7).
The fuse is located on the end cap opposite of the key slot
where you turn the battery on and off (Figure 8).
Fuse
3
For Boomerang, Boomerang Plus, City Commuter,
Comfort Cruiser, Interceptor, & Tandem
For Trail Tracker
3
Figure 7.
Figure 8.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pedego Interceptor and is the answer not in the manual?

Pedego Interceptor Specifications

General IconGeneral
Load Capacity250 lbs
Motor500W
Battery SpecsLithium-ion
Top Speed20 mph
SuspensionFront suspension
DisplayLCD display
Brakesdisc brakes

Related product manuals