13 of 14
ISSUED: 01-10-07 SHEET #: 009-9039-2 03-12-07
17
Attaching Screen with VESA 100 Mounting Pattern
• If screws don't get three complete turns in the screen inserts or if screws bottom out and hook plate is still not tightly
secured, damage may occur to screen or product may fail.
WARNING
Choose hole pattern as shown in figure 17. Attach hook
plate (B) to back of screen using four M4 x 12 mm
screws. Tighten screws using an allen wrench.
M4 X 12 MM SCREWS
fig 17
Attach hook plate (B) to screen mount bracket (A).
B
A
19
I
I
I
2° Backward Tilt 5° Forward TiltNo Tilt
B
18
Insert two 1/4-20 x 12 mm screws (I) into holes indicated below for desired screen orientation. Tighten all screws
using 4 mm allen wrench (R).
To Next Page
Loading...
