14 of 14
ISSUED: 01-10-07 SHEET #: 009-9039-2 03-12-07
Attaching Screen to a Dedicated Plate
Cable Management
Run cords through upright (G) using cord management holes.
20
22
CORD
MANAGEMENT
G
fig. 21.1
Attach adapter bracket to back of plasma screen using
four socket pin screws, as shown. Tighten screws using
security allen wrench.
Attach hook plate (B) to the back of adapter plate as
shown in fig. 21.1. Then attach hook plate (B) to
screen mount bracket (A) as shown in fig. 21.2.
21
fig. 21.2
B
A
© 2007 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
To Previous Page
Loading...
