Thank you for choosing a Peg-Pérego 
product.
 •Peg-PéregoS.p.A.isISO9001certified.
 •This certification offers customers and 
consumers a guarantee of transparency 
and confidence in the company’s mode of 
operation.
   
Product characteristics
  • The"PrimoViaggiotri-fix"group0+carsafetyseathas
been subjected to all safety tests and is approved under 
EuropeanstandardECER44/04,forchildrenofweightfrom
0 to 13 kg (0 to 12-14 months).
  •  IMPORTANT: "Primo Viaggio tri-fix", group 0+, must 
be installed facing opposite to the normal forward 
movement of the car, on seats without airbags. Do 
not install “Primo Viaggio tri-fix” on seats that face 
backwards or sideways. 
  • "PrimoViaggiotri-fix"hasan“AdjustableSideImpact
ProtectionSystem”:thisoffersimprovedprotectionagainst
sideimpactswiththe“simultaneoussystem”forheadrest-
harness adjustment.
  • "PrimoViaggiotri-fix"isapprovedforinstallationincars
without a base support or with two types of base as 
required(theuseofaseatbaseoffersimprovedsafety):
"AdjustableBase"or"IsofixBase"(checkthatthevehicleis
fitted with the Isofix system -a list of car models fitted with 
the system is provided with the product).
   
 WARNING
  • Read the instructions carefully before use and keep 
them in the holder provided for future reference. 
Failure to closely follow the installation instructions for 
the car safety seat will put your child at risk. 
  • The assembly and installation operations must be 
conducted by adults.
  • Avoid inserting fingers into the mechanisms.
  • Install this group 0+ car safety seat facing opposite to the 
normal forward movement of the vehicle.
  • Death or serious injury can result if this car safety seat is 
installed on seats with airbags.
  • Eliminate danger by disabling airbags surrounding the 
position of the car safety seat.
  • In the case of rotating or movable seats it is important 
to install this safety seat facing opposite to the normal 
forward movement of the vehicle.
  • When travelling take special care to make sure that luggage 
or other objects do not injure the child in the safety seat in 
the case of accidents.
  • Do not use installation methods different from those indicated. 
This would result in the risk of detachment from the seat.
  • Carsafetyseat,group0+,“Universal”approvedunder
European standard ECE R44/04 for children of weight from 
0 to 13 kg (0 to 12/14 months). Suitable for installation on 
themajorityofvehicleseats,butnotall.
 • Group 0+ child car seat with class E semi-universal Isofix base.
  • The car safety seat can be correctly installed if the vehicle’s 
use and maintenance manual indicates compatibility with 
“Universal”group0+restraintsystems.
  • Thissafetyseatisclassedas“Universal”incompliancewith
stricter approval criteria than previous models that do not 
have approval labels.
  • Thesafetyseatcanonlybeusedinapprovedvehicles,fitted
withstaticorinertia-reelthree-pointseatbelts,approved
underregulationUN/ECEno.16orequivalentstandards.It
must not be used with two-point or lap seat belts.
  • Toinstallthecarsafetyseat,passthethree-pointseatbelt
through the slots in the safety seat indicated with light 
blue markings. Do not use installation methods different 
from those indicated. This would result in the risk of 
detachment from the seat.
  • Ensure that the three-point car seat belt fixing the safety 
seat is always taut and not twisted. It should be replaced in 
the case of heavy stress as a result of an accident.
  • Neverleavethechildunattendedinthesafetyseat:
observe him/her even when sleeping. 
  • Never remove the child from the seat while the vehicle is in 
 EN_English