24
5• Lift the backrest of the child seat
until you hear it click (fig_a).
The backrest can move between the
two locks, as indicated in figure b.
When the operation is completed, the
product is free-standing.
Features of the product
6• The headrest can be adjusted in 6
positions. Lift the handle on the rear
of the backrest and position it at the
desired height.
IMPORTANT: as the child grows,
it is necessary to adjust the height
according to the stature of the
child.
IMPORTANT: after completing
the operation, try moving the
headrest to verify that it is correctly
fitted in place.
7• Viaggio 2/3 Surefix is fitted with two
lateral and removable drink holders.
8• Viaggio 2/3 Surefix is fitted with a
reclination system that guarantees
maximum comfort. To recline the
seat, pull the handle on the front and
simultaneously lift the seat.
9• If possible, recline the car’s backrest
while the child is asleep and then
recline the backrest of the child seat to
the same slant.
The Viaggio 2/3 Surefix backrest will
adapt to the slant of the car’s backrest,
guaranteeing greater comfort for your child.
Fitting the child car seat
with the safety belts and
Surefix fittings
For cars fitted with Isofix
hooks
This method can be used only if the car
is fitted with Isofix hooks.
For further information on the
availability of these hooks and their
location, refer to the instruction manual
of the car. L'aggancio con i connettori
surefix garantisce una maggior
stabilità e sicurezza in auto, ma non
sostituisce la funzione delle cinture
del veicolo.
10• To stretch the Surefix hooks, press
the button on the front inside the bag,
as shown in the figure, and stretch
them manually.
11• Fix the Surefix connectors to the
Isofix hooks of the car seat, verifying that
they “click” in place. Tension the belt and
simultaneously push the child car seat
towards the backrest of the car seat.
IMPORTANT: after completing
the operation, try moving the seat to
verify that the Isofix fittings have been
correctly hooked to the Isofix fittings .
12• To detach the Surefix connectors of
the child car seat from the Isofix hooks,
press the button on the front inside
the bag and release the connectors
belts in order to be able to manually
detach them by pressing the safety
lever situated on the hooks, as shown
in the figure.
Fitting the child car seat
with the safety belts
For cars that are NOT
fitted with Isofix fittings
13• Place Viaggio 2/3 Surefix on the car
seat in the direction of travel, as shown in
the figure, and place the child on the seat.
How to secure your child
on Viaggio 2/3 Surefix
14• Secure your child with the car
safety belt as shown in the figure.
15• Fix the car safety belt to the car,
ensuring that it clicks in place. Position
the two sections of the belt as shown
in the figure.
16• To complete the fixing, insert the
safety belt diagonally in the upper slot
above the child’s shoulder.
IMPORTANT: if the belt is slack,
tension it. Verify that the belt is
always tensioned and untwisted.
17• The safety belts are correctly
positioned if the child’s shoulders are
below the intersection point of the
safety belts, as shown in the figure.
IMPORTANT: the safety belts
should not be too above or below
the child’s shoulders.
How to remove the lining
from the bag
When removing the lining of Viaggio
2/3 Surefix, do NOT detach the three
elements - headrest, backrest, seat -
but keep them together.
REMOVE THE LINING FROM THE
SEAT:
18• Detach the small hooks of the seat
bag from the points and following the
sequence shown in the figure. Remove
the central belt.
To Next Page
Loading...
Need help?
General
