EasyManuals Logo

Peimar Virtus PSI-J4000-TP User Manual

Peimar Virtus PSI-J4000-TP
Go to English
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
56
EN
CAUTION
The PV inverter will become hot during operation. Please do
not touch the heat sink or peripheral surface during or shortly
after operation.
Risk of damage due to improper modications.
NOTICE
The PV inverter is designed to feed AC power directly to
the public utility power grid; do not connect AC output of the
inverter to any private AC equipment.
2.2 Explanations of symbols
DANGEROUS ELECTRICAL VOLTAGE
This device is directly connected to public grid, thus all work
to the inverter shall only be carried out by qualied personnel.
DANGER to life due to high electrical voltage!
There might be residual currents in inverter because of large
capacitors.
Wait for 5 MINUTES before you remove the front lid.
NOTICE, DANGER!
This is directly connected with electricity generators and
public grid.
DANGER OF HOT SURFACE
The components inside the inverter will release a lot of heat
during operation. Do not touch metal plate housing during
operating.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Peimar Virtus PSI-J4000-TP and is the answer not in the manual?

Peimar Virtus PSI-J4000-TP Specifications

General IconGeneral
BrandPeimar
ModelVirtus PSI-J4000-TP
CategoryInverter
LanguageEnglish

Related product manuals