Peimar Virtus PSI-J4000-TP User Manual

77
EN
Graph
Init Grid Compliance 30-10-18 15:47
Setting Run-Info About
Power
0 W
E-Today
0.00 kWh
E-Total
0.00 kWh
T-Today
0.0 h
T-Total
0.0 h
Please set
grid country
Country
Australia
Austria
Belgium
Brazil
Denmark
Finland
France
Luxembourg
Netherlands
1
The display shows the country options to select.Pressing the “▼“ or ”▲“ to
select the correct country and press “ENT” button to conrm the selection.
Note: The conguration of the country of usage must be made at the rst start,
before the inverter starts operating. An incorrect choice leads to malfunction of
the device. If users can not locate the corresponding country, please abort the
setting and contact Peimar assistance.
6.2.2 State
If the country has been set, the LCD shows the inverter operation status:
Initialization, Normal, Wait, Error and Update.
Initialization of the system
The inverter in normal (function) operation
The inverter in stand-by state
Normal
Init
A fault occurs during operationError
Wait
The state of updating rmwareUpdate

Peimar Virtus PSI-J4000-TP Specifications

General

Brand	Peimar
Model	Virtus PSI-J4000-TP
Category	Inverter
Language	English