How to stop my Pelgrim Dishwasher from overfilling with water?
To address overfilling in your Pelgrim Dishwasher, clear the drainage pump. If the problem continues, contact your nearest service center.
Why are the dishes not dry enough in my Pelgrim Dishwasher?
If your Pelgrim Dishwasher isn't drying dishes well enough, first, activate the Automatic door opening option. Ensure the dishwasher is fully loaded. Check the rinse aid level and increase the dosage if needed. If you're using all-in-one detergents with the TAB setting activated, consider switching detergents or deactivating the TAB setting and using separate salt and rinse aid.
Why does the control panel of my Pelgrim GVW250L/P03 not react?
If the control panel of your Pelgrim Dishwasher doesn't respond when pressed, wait a moment and try again, especially if you've just opened the door. Ensure the door is open, as the control panel only works when the door is open. Also, clean the control panel with a dry or slightly damp cloth to remove any dirt.
What to do if I cannot close the door of my Pelgrim GVW250L/P03 Dishwasher?
If the door of your Pelgrim Dishwasher won't close, check that the baskets are correctly positioned horizontally. Also, make sure that the dishes are not blocking the baskets from sliding into place.
Why do the dishes from my Pelgrim GVW250L/P03 have a sticky film?
If the dishes washed in your Pelgrim Dishwasher have a sticky white or blue film, the rinse aid dosage setting is likely too high. Reduce the dosage. If you have very soft water, consider diluting the rinse aid 50:50 with water.
Why is there detergent residue in my Pelgrim GVW250L/P03 after washing?
If you find detergent residue in the detergent compartment of your Pelgrim Dishwasher after washing, it could be because the compartment was damp when you added the detergent; make sure it's dry. Also, check that the dishes aren't blocking the detergent compartment from opening properly.
Why is my Pelgrim GVW250L/P03 making a rattling sound?
If you hear a rattling sound when your Pelgrim Dishwasher is running, make sure the dishes are placed securely and not touching each other. Also, check the spray arms to ensure they can rotate freely.
How to remove grease deposits from my Pelgrim Dishwasher?
If there are grease deposits in your Pelgrim Dishwasher, it's likely due to using low temperature programs for an extended period. To resolve this, select a high-temperature program for heavily soiled dishes, such as Intensive 70°, or use the self-cleaning program.
How to get rid of bad odour in Pelgrim GVW250L/P03?
If your Pelgrim Dishwasher has a bad odor, clean around the seals and in corners with a washing-up brush and low foaming cleaner. If you've been using low temperature programs for a long time, run a program with a high temperature once or twice a month, or use the self-cleaning program.
What to do if water remains in my Pelgrim GVW250L/P03 after cycle?
If your Pelgrim Dishwasher has water remaining after a cycle, the filters might be clogged; clean the coarse and fine filters. Ensure the filters are correctly fitted. Check for debris in the drainage pump and ensure the yellow drainage pump stop is in place. Inspect the drainage hose for kinks or blockages; disconnect it from the sink unit's water trap to check for obstructions, ensuring the connection has an inner diameter of at least 14 mm.
General| Brand | Pelgrim |
|---|---|
| Model | GVW250L/P03 |
| Category | Dishwasher |
| Language | English |
To Next Page