Why is the water softener leaking salt in my Pelgrim GVWC390XL Dishwasher?
If the water softener in your Pelgrim dishwasher is leaking salt, make sure the salt compartment lid is properly tightened. If the leakage continues, contact your nearest service center.
How to remove spots on stainless steel in Pelgrim GVWC390XL Dishwasher?
If you find spots on stainless steel or silver items in your Pelgrim dishwasher, consider these points: * Rinse off foods like mustard, mayonnaise, lemon, vinegar, salt, and dressings promptly, or use the Rinse and hold program. * Separate dishes made from different metals to avoid contact during washing. * Check and adjust the rinse aid dosage setting. * If using all-in-one detergents with the TAB setting activated, switch detergents or deactivate the setting and add salt and separate rinse aid. * Ensure the salt compartment is full. * Verify that the water softener setting is correct.
How to remove grease deposits from Pelgrim GVWC390XL Dishwasher?
To address grease deposits in your Pelgrim dishwasher, select a program with Intensive. This program uses a higher temperature to dissolve grease on very dirty dishes. Alternatively, run a self-cleaning program once or twice a month. Refer to the Self-cleaning section in the chapter Using the dishwasher for instructions.
Why are the dishes not clean in my Pelgrim Dishwasher?
If the dishes in your Pelgrim dishwasher aren't getting clean, make sure the spray arms aren't blocked by dishes. Also, check if the spray arm holes or bearings are blocked and clean them if necessary, referring to the Care and cleaning chapter. If you're using an unsuitable dishwashing program, select a program with Intensive, which uses a higher temperature to dissolve grease on very dirty dishes.
How to get rid of sticky white/blue film on dishes from Pelgrim GVWC390XL Dishwasher?
If you see a sticky white/blue film on your dishes after washing in your Pelgrim dishwasher, the rinse aid dosage setting might be too high. Try reducing the dosage, referring to the chapter Settings. If you have very soft water, consider diluting the rinse aid 50:50 with water.
What does error F54 mean on Pelgrim GVWC390XL Dishwasher?
If your Pelgrim dishwasher displays error code F54, which indicates overfilling water, immediately turn off the water tap and contact your nearest service center. To prevent water leakage, do not remove the plug from the wall socket until the water tap on the supply line has been turned off.
What to do if low temperature programs have been selected for a prolonged period on Pelgrim GVWC390XL?
To address the issue of low temperature programs being selected for a prolonged period on your Pelgrim dishwasher, run a program with a high temperature once or twice a month, or use a self-cleaning program. Refer to the Self-cleaning section in the chapter Using the dishwasher.
What does error code F41 mean on Pelgrim GVWC390XL?
If your Pelgrim dishwasher displays error code F41, it indicates a heater fault. Turn off the water tap, remove the plug from the wall socket, and contact your nearest service center.
What does F10 error mean on Pelgrim Dishwasher?
If your Pelgrim dishwasher displays error code F10, it indicates overfilling water. Try unblocking the drainage pump. See the chapter Care and cleaning for instructions. If the problem continues, it is recommended to contact your nearest service center.
What does F67 error mean on Pelgrim GVWC390XL Dishwasher?
If your Pelgrim dishwasher displays error code F67, it indicates a water inlet fault. First, ensure that the water tap is turned on. Next, check the outer filter on the inlet hose to make sure it is not blocked. You can find instructions on how to unblock the inlet hose filter in the chapter Care and cleaning. If the issue persists, contact your nearest service center.
General| Brand | Pelgrim |
|---|---|
| Model | GVWC390XL |
| Category | Dishwasher |
| Language | English |
Overview of the control panel, display, and initial settings like language and water hardness.
Key safety guidelines for operation, child safety, and general warnings.
How to activate child lock and understanding the overflow guard function for safe operation.
Instructions for safely storing, transporting, and handling the dishwasher's packaging materials.
Information on how to dispose of the appliance and explanation of relevant symbols.
How to check and set the water hardness for optimal dishwasher performance and water softener function.
Guide to configuring initial settings like language, rinse aid, water hardness, and TAB function.
Instructions for topping up rinse aid and salt compartments for optimal washing results.
Advice on reducing energy and water consumption during dishwasher use and program selection.
Guidance on choosing programs and options like 'Eco' and 'Automatic door opening' for efficiency.
Guidelines for loading different types of dishes, fragile items, and general loading principles for best results.
Detailed information on using the top cutlery tray, upper basket, and lower basket for efficient loading.
Instructions on adding detergent, using all-in-one detergents, and understanding detergent compartment.
Detailed guide to all available wash programs, modes, and their consumption values.
Steps to connect to WiFi, use the Connect Life app, and pair devices for remote operation.
How to remotely control the dishwasher, pair multiple devices, and manage WiFi connection settings.
How to adjust programs, display, rinse aid, and other settings for personalized use.
Procedures for cleaning filters, spray arms, and the dishwasher tub.
A list of error codes and their corresponding causes and recommended actions for quick problem resolution.
Solutions for common problems like control panel issues, door problems, cleaning effectiveness, and water/noise.
Solutions for dishes not drying properly, grease deposits, and film removal.
Steps to resolve issues with network connection, app pairing, and software updates.
Important dimensions, safety precautions, and general setup guidelines for installing the dishwasher.
Guidelines for electrical connections, water supply, and an overview of technical specifications and energy labelling.
To Next Page