Environmental aspects
Disposal of packaging and appliance
This appliance is made from sustainable materials. This appliance must be disposed of in a responsible
manner at the end of its service life. Contact the local authorities for information about the method.
INFORMATION!
See also the chapter ‘Disposal’ in the Safety instructions.
The packaging of the appliance is recyclable. The following materials may have been used:
• Cardboard.
• Polyethylene foil (PE).
• CFC-free polystyrene (hard PS foam).
These materials must be disposed of in a responsible manner and in accordance with government
regulations.
The appliance is marked with a crossed out wheeled bin symbol to draw
your attention to the requirement for the separate disposal of domestic
electrical appliances. This means that the appliance may not be disposed
of in unsorted household waste at the end of its service life. The appliance
must be taken to a special municipal waste processing location for
separated waste or to a dealer who provides this service.
Collecting and disposing of domestic appliances separately avoids
detrimental consequences for humans and the environment. This ensures
that the materials used to make the appliance can be recovered and that
substantial savings in the use of energy and raw materials can be
achieved.
Declaration of conformity
We hereby declare that our products conform to the applicable European
Directives, Regulations and requirements, as well as all requirements in
the standards to which reference is made.
26
To Next Page
Loading...