•
All electrical connections should be made by a qualified
electrician.
•
Make sure that the electrical information on the rating plate
agrees with the power supply. If not, contact an electrician.
•
Always use a correctly installed shockproof socket.
•
Do not use multi-plug adapters and extension cables.
•
Make sure not to cause damage to the electrical components
(e.g. mains plug, mains cable, compressor). Contact the
Service or an electrician to change the electrical components.
•
The mains cable must stay below the level of the mains plug.
•
Connect the mains plug to the mains socket only at the end
of the installation. Make sure that there is access to the mains
plug after the installation.
•
Do not pull the mains cable to disconnect the appliance.
Always pull the mains plug.
•
WARNING! Do not locate multiple portable socket-outlets
or portable power supplies at the rear of the appliance.
8
To Next Page
Loading...
